Manual Glazing Bead Saw Machine With Conveyor (SGB-100M)
Manual Glazing bead cutting saw comes with: 2x HSS saw blades, Pneumatic clamping, Height Adjustable One side supports 2.5-meter measuring length stop.
Features and Functionality:-
- The machine is standard equipped with completed bearing and measuring conveyors of 2.5 meter.
- One fixed motor on the mobile carriage set at 45° to the work piece support surface.
- Vertical dual pneumatic clamping system with higher griping clamp pads.
- 2 cutting saw blades HSS (High Speed Steel) with small blade having tapered teeth.
- Setting handle for forward & backward movement as well as for rotating the motor assembly mounted on the carrier.
- Care has been taken over the safety measures, both mechanical and electrical.
- Power supply protects system from voltage overload.
| Technical Specification |
| Saw Blade Diameter
| 200mm and 100mm.
|
| Shaft Diameter
| 32mm Voltage 380-415 v, 3~, 6 amps
|
| Compressed Air
| 7 Bar/100psi
|
| Air Consumption
| 2 Litre. Per cycle
|
| Dimensions (Length, Width, Height)
| 540 x 1000 x 1150 mm
|
| Weight
| 110 kg
|
